Pneumatic carrier for use with photopolymer engraved sleeves
HD print level
high longevity
humidity resistant
manual handling
mechanical resistance
more productivity
protection ring
quality certified
High modulus carbon fiber pneumatic Carrier with double layer compressible external surface designed with a special distribution of the compressed air flow for mounting endless photopolymer engraved sleeves. The printing vibration damping and the high stiffness of the high modulus carbon fiber tube allow a superior production speed. Cushion Bridge can be supplied both in Side Air and Flow Through configuration.
Fibreglass base sleeve. Outer support: high module (HM) carbon fibre tube. The aluminium side flanges guarantee total resistance against humidity and solvent penetration. The compressible area is made by a first base layer in special urethane with open cells and a second top layer with closed cells that guarantee a perfect rebound with top printing results both with full tone and color grade.
Colour
Mid Grey
Min/Max Length - Tolerance UNI:ISO 2768T1m
350 - 2.850 [mm] // 13.78" - 112.205"
Thickness
5-65 [mm] // 0.020" - 2.56"
Surface hardness - Tolerance +/- 5
63 ShA
Electrical resistance
<1 MOhm
Compressed air for sleeve assembly
6 - 10 [bar] // 87 - 145 PSI Minimum capacity: 700 [l//min] with air input having a free passage with D => 8[mm]
Operating temperature
18° - 40 °C // 64,4 - 104 °F
Register notch
Protection steel ring with integrated register notch
Working tolerance
External finishing with precision grinding (Ra=0.8) with T.I.R. < 0.02 mm] when measured on a mandrel with T.I.R. <= 0.005 [mm]
Cleaning and Storage
Use ethanol with an additional max 20% of ethyl acetate; store vertically
